Extended Range Software Defined Radio Kit with 3 Antennas
The ZDA Nooelec NESDR SMArt XTR SDR Kit is a complete receiving package built around the genuine Nooelec NESDR SMArt XTR antenna bundle. It includes a USB software defined radio receiver, three antenna masts, an antenna base and feed cable, plus an eight-piece SMA adapter kit and a USB-C OTG cable.
It is a practical option for radio enthusiasts, amateur radio operators and Australians setting up a portable or home radio monitoring station. Connect the receiver to a compatible computer or Android device, install suitable SDR software and use the supplied antennas to start exploring compatible radio signals.
ZDA Kit Includes
1 × Nooelec NESDR SMArt XTR SDR receiver – E4000 tuner, RTL2832U USB interface, 0.5 PPM TCXO, aluminium enclosure and SMA female antenna input.
1 × Nooelec antenna base with 2 m RG-58 feed cable.
1 × Telescopic antenna mast – adjustable length for different receiving applications.
1 × 433 MHz antenna mast – fixed-frequency antenna, approximately 27 cm long.
1 × UHF antenna mast – fixed-frequency antenna, approximately 11 cm long.
1 × Nooelec eight-piece SMA adapter kit with storage case for connecting the receiver to different antenna and coaxial connectors.
1 × SOLMIMI USB-C to USB-A OTG cable (approximately 20 cm) for compatible USB-C Android devices and computers.
Receiver Specifications
Receive-only USB software defined radio; no transmit capability.
Approximate frequency range: 55–2300 MHz, with a small coverage gap near 1100 MHz.
RTL2832U demodulator/USB interface and E4000 tuner.
Female SMA antenna connector and silver brushed aluminium enclosure.
Integrated heatsink and RF-focused internal components.
Adapter Kit
The included Nooelec adapter kit contains SMA male adapters to N female, F female, SO-239 female, BNC female, MCX female, PAL female, RP-SMA female, and SMA male barrel connections. All eight adapters are supplied in a carry case.
Before You Order
The supplied antennas are suitable for a range of receiving applications, but reception depends on location, frequencies, equipment and antenna selection. A compatible computer or USB OTG-capable device and suitable SDR software are required. Some Android devices may require additional power or drivers.
The NESDR SMArt XTR has a small frequency gap near 1100 MHz and is not recommended by Nooelec for ADS-B aircraft reception. It is a receive-only device and cannot transmit. An HF upconverter is not included.
Nooelec receiver and antenna bundle manufacturer SKU: 100723. The complete ZDA kit also includes the separate SMA adapter kit and USB-C OTG cable described above.
ZDA Nooelec NESDR SMArt XTR SDR Kit with 3 Antennas
1 / of3
Quick shop
Choosing a selection results in a full page refresh.